Skip to content
Wood-look slide gate in a black steel frame across an alley driveway, a cedar-sided garage behind it

Gate Services in San Antonio

Every gate job comes back to the same goal: a driveway or property entrance that opens, closes and latches every time. The work falls into repairs, new gates, openers, access control and routine upkeep, and one gate often needs more than one of them.

Pick the line that matches what the gate is doing now, or what you want it to do next.

Service Lines and What They Cover

  • Gate Repair

    For a gate that is still standing but no longer moves the way it should. The cause is usually one part that has worn, bent or slipped, and setting that part right brings the whole gate back into line.

    Covers sagging hinges, hinge posts, damaged rollers, bent tracks, latches, faulty safety sensors and bent panels.

    Gate Repair details
  • Gate Installation

    New sliding and swing gates for driveways and property entrances, chosen to suit the opening, the slope of the drive and the way the gate will be used. It covers first gates and replacements for gates that have run their course.

    Covers swing, slide and cantilever gates, walk gates, posts and footings, hinges, latches and tracks, with room planned for an opener.

    Gate Installation details
  • Gate Openers

    The motor, the arm or drive and the control board that move an automatic gate. Worn operators and motors are replaced, and stalls, sudden reversing and gates that stop short are traced to the part behind them.

    Covers swing and slide operators, motors, control boards, limit switches, photo eyes and manual releases.

    Gate Openers details
  • Access Control

    The devices that decide who comes through: keypads, intercoms and remote openers, set up and kept working. Codes and remotes are added or cleared as people come and go.

    Covers keypads, intercoms, remote openers and card readers.

    Access Control details
  • Gate Maintenance

    Routine care for a gate that still works but has started to squeak, slow down or need a shove. Regular adjustment keeps small wear from turning into a gate that will not close.

    Generally covers hinges or rollers, tracks, fasteners, alignment, the opener and its safety sensors.

    Gate Maintenance details

The lines overlap. A new gate is the right time to plan its opener and keypad, and a visit about a dead keypad can turn up a tired operator behind it.

Black arched double gate with gold Greek-key borders and two bronze lion ornaments over a brick-paver drive
Long black bar-style cantilever slide gate on a concrete curb in front of a glass and metal office building
Cedar plank double swing gate in a dark frame between red-brick piers with lanterns, a concrete drive in front

Not Sure Which You Need?

Match what you want to the service that usually handles it.

What you want from the gate, the service that handles it and its page
What you wantWhich servicePage
My gate sags and drags on the driveGate repair: the hinges, the hinge post or its footingGate Repair
The gate only latches if I push itGate repair: the latch, and whatever moved the gate out of lineGate Repair
I want my existing gate to open by remoteGate openers: an operator added to the gate, then remotes for itGate Openers
The motor hums but the gate does not moveGate openers: the motor, its gears or a manual release left disengagedGate Openers
The gate stops partway and backs upGate openers: the safety sensors, the limit settings or a binding gateGate Openers
New neighbors need gate codesAccess control: new codes added to the keypadAccess Control
A remote stopped working or went missingAccess control: remotes paired with or erased from the receiverAccess Control
We have no gate yet and want oneGate installation: the style, the material and a plan for an openerGate Installation
The frame is rusted through or rottedGate installation: a replacement gate sized to the openingGate Installation
The gate is fine but squeaks and feels stiffGate maintenance: lubrication, adjustment and a look over the hardwareGate Maintenance

A grinding noise, a slow gate or a leaf that drifts open on its own is sorted by likely cause and urgency under signs and symptoms.

Who Uses the Entrance

The same fault weighs differently at a house, a business and a shared entrance.

  • Homes. For homeowners in Olmos Park, Alamo Heights and across San Antonio, a driveway gate opens a few times a day for the family, guests and deliveries. What matters is a gate that closes behind the car and latches, remotes that work from the street, and a manual release everyone in the house knows how to use.
  • Small businesses. A gate at a shop, yard or office can run from opening time to closing time, so its operator has to be built for that kind of use. Staff need their own way in, and cars leaving need a way out that does not depend on one remote.
  • Neighborhood associations. A shared entrance serves a whole street or subdivision: many users, codes that change as residents move in and out, and visitors who need a way to reach someone. Reliability matters most here, since a stuck gate holds up everyone at once.

Whichever it is, mention the kind of entrance and roughly how many people use it when you Schedule Service.

Describe What the Gate Does

Send it over or call, and the right service follows from there.

Call (726) 213-6879